Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Wiki Markup
    Dose per unit release factors (DPUR) were derived for the radionuclides in [R&D Publication 128|^SR-DPUB-128-E-E.pdf] \[2\] for reference organisms using dose rate per unit concentration (DPUC) data in air, soil and water combined with simple dispersion modelling factors (DPUCs were calculated based on reference organism geometries, concentration factors and occupancy factor information; the method is described in full in the [Sp1a report|^SP3-101-SP1A-E-E.pdf] \[3\]).
  • Wiki Markup
    Surrogate radionuclides were selected for those not included in R&D128 \[1, table A1.1\] generally based on cautious assumptions.
  • Wiki Markup
    A spreadsheet tool (incorporating the DPUR for each radionuclide, site specific dispersion parameters and the authorisation limit) was used to calculate the dose rate to the worst affected reference organism.  This tool is not currently publicly available, however, the DPUR data is provided in \[1\] and the method and data used to incorporate site specific dispersion parameters is published in the Initial Radiological Assessment Methodology Reports \[[4|^SCHO0309BPMN-e-e.pdf], [5|^SCHO0106BKDT-e-e.pdf]\].
  • Results compared with the dose rate threshold of 40µGy/h.

...

5    R W Allott, B Lambers and J G Titley, Initial radiological assessment methodology - part 1 user report (2006)
http://publications.environment-agency.gov.uk/pdf/SCHO0106BKDT-e-e.pdf

...